+86 29-68806001 info@dec-titan.com EN   DE
Home
Titanium
Ti Grade 11 / 3.7225
Titanium Grade 11/3.7225

Low-alloy Titanium Grade 11/3.7225 has mechanical properties similar to Commercially Pure Titanium Grade 1. This grade offers excellent ductility, cold formability, high impact toughness and weldability. Due to the addition of palladium, it also has excellent corrosion resistance in crevices and reducing acid chloride environments. This grade is suitable for chemical industries and deep drawing.

Material Data Sheet
EN DIN ASTM UNS
Titan Grade 11 3.7225 Ti-Grade 11 R52550
Chemical Composition
Pd% Fe% C% N% O% H% Ti%
0.12-0.25 Max 0.2 Max 0.08 Max 0.03 Max 0.18 Max 0.015 rest
Physical Characteristics
FORM VALUE FORM VALUE
Density 4.5 g /cm3 CTE, linear 20°C 0~100℃ 8.6 μm/m-℃
Tensile Strength,Ultimate 240 MPa CTE, linear 250°C 0~315℃ 9.2 μm/m-℃
Yield strength (0.2% Offset) 138 MPa CTE, linear 500°C 0~540℃ 9.7 μm/m-℃
Modulus of Elasticity 105 GPa Thermal Conductivity 22.6 W/m-K
Compressive Modulus 110 GPa Melting Point Max 1670 ℃
Shear Modulus 45 GPa Specific Heat Capacity 0.52 J/g-℃
Elongation at Break 24% Poisson's Ratio 0.37
Hardness, Brinell 120
Applications
Chemical industries, Deep drawing
Scope of supply
FORM RANGE(mm) STANDARD
Bars/Billets Dia. 2 - 400 ASTM AMS ASME MIL JIS BS
Sheets/Plates

0.3≤Thickness<4  W 400-1200  L 1000-3000

4≤Thickness<200  W 400-2500  L 1000-6000

ASTM AMS ASME MIL JIS BS

ASTM B265 F136 F67 AMS4928

Tubes/Pipes

Outer diameter:3-114  Thickness:0.2-9(Seamless tubes & pipes)

Outer diameter:20-600  Thickness:0.5-25(Welded pipes)

ASTM AMS ASME MIL JIS BS

ASTM B337 B338 B861

Other

Flanges, Forgings, Pipe/tube fittings, Elbows, Reducers, Bolts/Screws, Nuts, Washers, Irregular parts

ASTM AMS ASME MIL JIS BS

The scope of supply differs a little depending on the material quality. Please contact us for the product details and the other sizes.

We can customize any sizes according to your requirement.

Material Service
Laser cutting, Plasma cutting, Sawing, Waterjet cutting, Shearing, Chamfering, Marking
Terms of delivery
FOB/CFR/CIF/DDU/DDP
Transportation
Sea transportation, Land transportation, Railway transportation, Air transportation

Limitation of Liability and Disclaimer of Warranty: In no event will Xi'an Dec Titanium Import & Export Co., Ltd. be liable for any damages arising from the use of the information included in this document or that it is suitable for the 'applications' noted. We believe the information and data provided to be accurate to the best of our knowledge but, all data is considered typical values only. It is intended for reference and general information and not recommended for specification, design or engineering purposes. Dec assumes no implied or express warranty in regard to the creation or accuracy of the data provided in this document.